|
|
|
Sto Premier Render Systems:
Approved Contractors
A specialist in the field of facades, Sto guarantees systematic design and the fine coordination of all components. The insulation systems, coatings and facade profiles are the outcome of a wealth of experience acquired over many generations of untiring research
|
 |
|
StoRend Fibre Plus
|
Surface preparation (if required)
 StoPrim Fungal anti-fungal primer
 StoPrim Micro adhesion promoting primer
 StoPrep Contact bonding bridge paint coat
1. Levelling coat
 StoLevell Cote cement-based levelling coat
2. Reinforcing coat
 StoArmat Classic cement-free reinforcing render
3. Reinforcing mesh
 Sto Glass Fibre Mesh reinforcing mesh or
 Sto-Shield Mesh AES protection against electro-smog
4. Decorative finish renders
 Stolit acrylic resin render or
 StoSilco silicone resin render or
 StoLotusan K water-repellent render |
Information sheets:
 StoRend Flex Cote
 (PDF 156 kb) |
StoRend Flex Cote is a specialist render system, using the highest quality materials to provide outstanding levels of crack resistance, weather protection and durability.
The factory batched StoLevell Cote can level irregularities of up to 20mm in a single application.
Sto Glass Fibre Mesh is embedded into the StoArmat Classic reinforcing coat while wet, providing over 15 times the crack resistance of conventional cementitious renders. StoRend Flex Cote can bridge joints between different substrates, minimising the risk of cracking. Expansion joints through the wall must be mirrored.
Sto's through-coloured, decorative finish renders do not require immediate overpainting and are available in white and the 800 colours of the StoColor System. The renders offer complete weather protection while remaining vapour permeable.
- Unique QS technology gives added protection when working in cold or wet conditions
- Can be used with unique Sto-Shield Mesh AES electrosmog protection mesh
- StoSure Warranty available (at additional cost)
|
| |
StoRend Flex Cote
|
Surface preparation (if required)
 StoPrim Fungal anti-fungal primer
 StoPrim Micro adhesion promoting primer
 StoPrep Contact bonding bridge paint coat
1. Levelling coat
 Sto-Fibrecoat fibre-reinforced intermediate render
2. Reinforcing mesh
 Sto Glass Fibre Mesh reinforcing mesh or
 Sto-Shield Mesh AES protection against electro-smog
3. Intermediate coat
 Sto-Primer vapour-permeable paint coat
4. Decorative finish renders
 Stolit acrylic resin render or
 StoSilco silicone resin render or
 StoLotusan K water-repellent render |
Information sheet:
 StoRend Fibre Plus
 (PDF 200 kb) |
StoRend Fibre Plus is a fibre-reinforced render system, providing outstanding levels of crack resistance, weather protection and durability.
The Sto-Fibrecoat factory-batched modified mineral levelling coat is fibre reinforced to provide an excellent level of crack resistance and good levelling ability. Sto-Fibrecoat has excellent adhesion properties, particularly suited to porous background where additional resistance to shrinkage is required.
Sto Glass Fibre Mesh is embedded into the Sto-Fibrecoat when wet, providing additional reinforcement against cracking.
Sto's through-coloured, decorative finish renders do not require immediate overpainting, and are available in white and the 800 colours of the StoColor System. The renders provide good weather resistance while remaining vapour permeable.
- Unique QS technology gives added protection when working in cold or wet conditions
- StoSure Warranty available (at additional cost)
- Can be used with unique Sto-Shield Mesh AES electrosmog protection mesh
|
|
|
Metsec |
|
Metek Building Systems |
|
| Sto |
|
| Marley Eternit |
|
| British Gypsum |
|
| Kingspan |
|
| Lafarge |
|
| Trespa |
|
| Eurofox |
|
| Sika |
|
| Promat |
|
| |
Dry Wall Systems:
|
GypWall™ CLASSIC
GypWall™ CURVE
GypWall™ RAPID & RAPID dB Plus
GypWall™ ROBUST
GypWall™ FREEZONE
GypWall™ QUIET
GypWall™ QUIET IWL
GypWall™ QUIET SF
GypWall™ STAGGERED
GypWall™ AUDIO
ShaftWall™
GypWall™ SECURE
BlastWall
FireWall
Timber Stud
GypWall EXTREME |
|
|
